"Your source for all your sealing needs since 1981."

Toll Free | 866.907.3129

P: 214.304.7103 | F: 214.736.1243

 



 

 

 

 

 

 
Home > Pneumatic Seals > Wear Rings > Simrit

 

Simrit Wear Rings & Guide Rings

If you need assistance please click on the link and complete the form provided or contact one of customer services representatives who are ready and available to assist you with your Request For Quotation, Order Processing-Fulfillment, or assist you with material-seal recommendations.

Please call us at 866.907.3129 for more information or assistance.

Click each link below to expand the corresponding Product Information.

  • FRA SIMRIT Piston Guide Ring

    Non-metallic guide component for rods for standardized housings, amongst others, according to ISO 10766. No seizure through material pairing metal/plastic. Medium load-bearing capacity, chamfered profile edges prevent edge-pressure in the corner radii of the housing groove. Simple snap-in fitting.

    Technical Data

    Linear Velocity Loadablilty Medium/Temperature
    3 ft/s
    1 m/s
    40 N/mm² / 5800 PSI at 20C/68F
    30 N/mm²/ 4350 PSI at 100C/212F
    (permitted specific surface pressing)
    PA 4112
    (filled Polyamide)

    Applications

    • earth moving equipment
    • fork lift trucks
    • agricultural equipment
    • HGV loading cranes
    • mobile lifts
    • manipulators

    Split, non-metallic piston guide ring. As a non-metallic guide component for pistons, for standardized housings, amongst others, according to ISO 10766.

    • no seizure through material pairing metal/plastic
    • medium load-bearing capacity
    • chamfered profile edges prevent edge pressure in the corner radii of installation groove
    • simple snap-in fitting
  • FRI SIMRIT Rod Guide Ring

    Non-metallic guide component for rods for standardized housings, amongst others, according to ISO 10766. No seizure through material pairing metal/plastic. Medium load-bearing capacity, chamfered profile edges prevent edge-pressure in the corner radii of the housing groove. Simple snap-in fitting.

    Technical Data

    Linear Velocity Loadablilty Medium/Temperature
    3 ft/s
    1 m/s
    40 N/mm² / 5800 PSI at 20C/68F
    30 N/mm²/ 4400 PSI at 100C/212F
    (permitted specific surface pressing)
    PA 4112
    (filled Polyamide)

    Applications

    • earth moving equipment
    • fork lift trucks
    • agricultural equipment
    • HGV loading cranes
    • mobile lifts
    • manipulators

    Split, non-metallic rod guide ring. Non-metallic guide component for rods, for standardized housings, amongst others, according to ISO 10766.

    • no seizure through material pairing metal/plastic
    • medium load-bearing capacity
    • chamfered profile edges prevent edge pressure in the corner radii of installation groove
    • simple snap-in fitting
    2017 All Rights Reserved.  Industrial Seal, Inc. 10460 Markison Road Dallas, Texas 75238 Tel: 866.907.3129 Fax: 214.736.1243 | Parker | Simrit | Disogrin | NOK | Merkel  |  Sitemap