"Your source for all your sealing needs since 1981."

Toll Free | 866.907.3129

P: 214.304.7103 | F: 214.736.1243

 



 

 

 

 

 

 
Home > Packing > Merkel
 

Merkel Packing Sets

If you need assistance please click on the link (or "Right Click" + "Save Target As" to save to your hard disk) and complete the form provided or contact one of customer services representatives who are ready and available to assist you with your Request For Quotation, Order Processing-Fulfillment, or assist you with material-seal recommendations.

Please call us at 866.907.3129 for more information or assistance.

 

Click each link below to expand the corresponding Product Information.

  • 0001 MERKEL 1170 V-Packing Set (1 + 3 + 2 + 1)

    This Merkel Rod V-packing set is composed of 3 rubber-fabric rings, two homogeoneous rings, and a male and female (top and bottom) adaptor ring. All Merkel V-packings are spirally wound by hand, rather than cut from sheets. This eliminates fabric end weave and delamination.

    Technical Data

    Pressure Speed
    40 MPa / 5800 PSI 0.5 m/s / 8 ft/s BI-NBR B246/ BI-NBR B 210/ 85 NBR B247

    Applications

    • Heavy duty applications
    • Injection molding machines
    • Civil engineering
    • Forging
    • Iron and steel industry
    • Compression molding
    • Marine hydraulics
    • Hydraulic presses
    • Scrap metal shearing

    Multi-part seal set for sealing piston rods, it consists of one pressure ring, at least three sealing rings and one support ring. This seal set is for robust operational areas, mainly for provision of replacement part to old plant.

    • Proven under extreme conditions
    • Long service life
    • Can be optimally adjusted for respective application
    • Functions over a certain time period even with poorer surfaces
    • Use and design are conditional, and have to be taken into account where there are fluctuations of leakage and friction behavior
  • 0002 MERKEL 1170 V-Packing Set (1 + 1 + 1)

    This Merkel PISTON V-packing set is composed of 1 rubber-fabric ring and male and female (top and bottom) adaptor ring. All Merkel V-packings are spirally wound by hand, rather than cut from sheets. This eliminates fabric endweave and delamination.

    Technical Data

    Pressure Speed
    40 MPa / 5800 PSI 0.5 m/s / 8 ft/s BI-NBR B246/ BI-NBR B 210/ 85 NBR B247

    Applications

    • Heavy duty applications
    • Injection molding machines
    • Civil engineering
    • Forging
    • Iron and steel industry
    • Compression molding
    • Marine hydraulics
    • Hydraulic presses
    • Scrap metal shearing

    Multi-part seal set for sealing piston rods, it consists of one pressure ring, at least three sealing rings and one support ring. This seal set is for robust operational areas, mainly for provision of replacement part to old plant.

    • Proven under extreme conditions
    • Long service life
    • Can be optimally adjusted for respective application
    • Functions over a certain time period even with poorer surfaces
    • Use and design are conditional, and have to be taken into account where there are fluctuations of leakage and friction behavior
  • 0003 MERKEL 1170 V-Packing Set (1 + 5 + 1)

    This Merkel Rod V-packing set is composed of 5 rubberfabric rings, and male and female (top and bottom) adaptor ring. All Merkel V-packings are spirally wound by hand, rather than cut from sheets. This eliminates fabric endweave and delamination.

    Technical Data

    Pressure Speed
    40 MPa / 5800 PSI 0.5 m/s / 8 ft/s BI-NBR B246/ BI-NBR B 210/ 85 NBR B247

    Applications

    • Heavy duty applications
    • Injection molding machines
    • Civil engineering
    • Forging
    • Iron and steel industry
    • Compression molding
    • Marine hydraulics
    • Hydraulic presses
    • Scrap metal shearing

    Multi-part seal set for sealing piston rods, it consists of one pressure ring, at least three sealing rings and one support ring. This seal set is for robust operational areas, mainly for provision of replacement part to old plant.

    • Proven under extreme conditions
    • Long service life
    • Can be optimally adjusted for respective application
    • Functions over a certain time period even with poorer surfaces
    • Use and design are conditional, and have to be taken into account where there are fluctuations of leakage and friction behavior
  • 0004 MERKEL 1170 V-Packing Set (1 + 3 + 1)

    This Merkel Rod V-packing set is composed of 3 rubberfabric rings, and male and female (top and bottom) adaptor ring. All Merkel V-packings are spirally wound by hand, rather than cut from sheets. This eliminates fabric endweave and delamination.

    Technical Data

    Pressure Speed
    40 MPa / 5800 PSI 0.5 m/s / 8 ft/s BI-NBR B246/ BI-NBR B 210/ 85 NBR B247

    Applications

    • Injection molding machines
    • Civil engineering
    • Forging
    • Iron and steel industry
    • Compression molding
    • Marine hydraulics
    • Hydraulic presses
    • Scrap metal shearing

    Multi-part seal set for sealing piston rods, it consists of one pressure ring, at least three sealing rings and one support ring. This seal set is for robust operational areas, mainly for provision of replacement part to old plant.

    • Proven under extreme conditions
    • Long service life
    • Can be optimally adjusted for respective application
    • Functions over a certain time period even with poorer surfaces
    • Use and design are conditional, and have to be taken into account where there are fluctuations of leakage and friction behavior
  • 0008 MERKEL 1170 V-Packing Set (1 + 2 + 1 + 1)

    This Merkel Rod V-packing set is composed of 2 rubber-fabric rings, 1 homogeoneous ring, and a male and female (top and bottom) adaptor ring. All Merkel V-packings are spirally wound by hand, rather than cut from sheets. This eliminates fabric endweave and delamination.

    Technical Data

    Pressure Speed
    40 MPa / 5800 PSI 0.5 m/s / 8 ft/s BI-NBR B246/ BI-NBR B 210/ 85 NBR B247

    Applications

    • Heavy duty applications
    • Injection molding machines
    • Civil engineering
    • Forging
    • Iron and steel industry
    • Compression molding
    • Marine hydraulics
    • Hydraulic presses
    • Scrap metal shearing

    Multi-part seal set for sealing piston rods, it consists of one pressure ring, at least three sealing rings and one support ring. This seal set is for robust operational areas, mainly for provision of replacement part to old plant.

    • Proven under extreme conditions
    • Long service life
    • Can be optimally adjusted for respective application
    • Functions over a certain time period even with poorer surfaces
    • Use and design are conditional, and have to be taken into account where there are fluctuations of leakage and friction behavior
  • 0009 MERKEL 1170 V-Packing Set (1 + 2 + 1)

    This Merkel PISTON V-packing set is composed of 2 rubber-fabric rings, and male and female (top and bottom) adaptor ring. All Merkel V-packings are spirally wound by hand, rather than cut from sheets. This eliminates fabric endweave and delamination.

    Technical Data

    Pressure Speed
    40 MPa / 5800 PSI 0.5 m/s / 8 ft/s BI-NBR B246/ BI-NBR B 210/ 85 NBR B247

    Applications

    • Heavy duty applications
    • Injection molding machines
    • Civil engineering
    • Forging
    • Iron and steel industry
    • Compression molding
    • Marine hydraulics
    • Hydraulic presses
    • Scrap metal shearing

    Multi-part seal set for sealing piston rods, it consists of one pressure ring, at least three sealing rings and one support ring. This seal set is for robust operational areas, mainly for provision of replacement part to old plant.

    • Proven under extreme conditions
    • Long service life
    • Can be optimally adjusted for respective application
    • Functions over a certain time period even with poorer surfaces
    • Use and design are conditional, and have to be taken into account where there are fluctuations of leakage and friction behavior
  • 0010 MERKEL 1170 V-Packing Set (1 + 4 + 1)

    This Merkel Rod V-packing set is composed of 4 rubberfabric rings, and a male and female (top and bottom) adaptor ring. All Merkel v-packings are spirally wound by hand, rather than cut from sheets. This eliminates fabric endweave and delamination.

    Technical Data

    Pressure Speed
    40 MPa / 5800 PSI 0.5 m/s / 8 ft/s BI-NBR B246/ BI-NBR B 210/ 85 NBR B247

    Applications

    • Heavy duty applications
    • Injection molding machines
    • Civil engineering
    • Forging
    • Iron and steel industry
    • Compression molding
    • Marine hydraulics
    • Hydraulic presses
    • Scrap metal shearing

    Multi-part seal set for sealing piston rods, it consists of one pressure ring, at least three sealing rings and one support ring. This seal set is for robust operational areas, mainly for provision of replacement part to old plant.

    • Proven under extreme conditions
    • Long service life
    • Can be optimally adjusted for respective application
    • Functions over a certain time period even with poorer surfaces
    • Use and design are conditional, and have to be taken into account where there are fluctuations of leakage and friction behavior
  • 0045 MERKEL 1170 V-Packing Set (1 + 4 + 1 + 1)

    This Merkel Rod V-packing set is composed of 4 rubber-fabric rings, 1 homogeoneous rings, and a male and female (top and bottom) adaptor ring. All Merkel V-packings are spirally wound by hand, rather than cut from sheets. This eliminates fabric endweave and delamination.

    Technical Data

    Pressure Speed
    40 MPa / 5800 PSI 0.5 m/s / 8 ft/s BI-NBR B246/ BI-NBR B 210/ 85 NBR B247

    Applications

    • Heavy duty applications
    • Injection molding machines
    • Civil engineering
    • Forging
    • Iron and steel industry
    • Compression molding
    • Marine hydraulics
    • Hydraulic presses
    • Scrap metal shearing

    Multi-part seal set for sealing piston rods, it consists of one pressure ring, at least three sealing rings and one support ring. This seal set is for robust operational areas, mainly for provision of replacement part to old plant.

    • Proven under extreme conditions
    • Long service life
    • Can be optimally adjusted for respective application
    • Functions over a certain time period even with poorer surfaces
    • Use and design are conditional, and have to be taken into account where there are fluctuations of leakage and friction behavior
  • 0047 MERKEL 1170 V-Packing Set with 3-5 Intermidiate Rings

    This Merkel Piston V-packing set is composed of 3-5 rubber-fabric rings, 1 plastic (POM) male adapter, and one female adapter ring. All Merkel v-packings are spirally wound by hand, rather than cut from sheets. This eliminates fabric endweave and delamination.

    Technical Data

    Pressure Speed
    40 MPa / 5800 PSI 0.5 m/s / 8 ft/s BI-NBR B246/ BI-NBR B 210/ 85 NBR B247

    Applications

    • Heavy duty applications
    • Injection molding machines
    • Civil engineering
    • Forging
    • Iron and steel industry
    • Compression molding
    • Marine hydraulics
    • Hydraulic presses
    • Scrap metal shearing

    Multi-part seal set for sealing piston rods, it consists of one pressure ring, at least three sealing rings and one support ring. This seal set is for robust operational areas, mainly for provision of replacement part to old plant.

    • Proven under extreme conditions
    • Long service life
    • Can be optimally adjusted for respective application
    • Functions over a certain time period even with poorer surfaces
    • Use and design are conditional, and have to be taken into account where there are fluctuations of leakage and friction behavior
  • 0048 MERKEL 1170 V-Packing Set with Solid Intermediate Ring

    This Merkel Piston V-packing set is composed of 3-4 rubber-fabric intermediate rings, 1 homogeneous intermediate ring, 1 plastic (POM) male adapter, and one female adapter ring. All Merkel v-packings are spirally wound by hand, rather than cut from sheets. This eliminates fabric endweave and delamination.

    Technical Data

    Pressure Speed
    40 MPa / 5800 PSI 0.5 m/s / 8 ft/s BI-NBR B246/ BI-NBR B 210/ 85 NBR B247

    Applications

    • Heavy duty applications
    • Injection molding machines
    • Civil engineering
    • Forging
    • Iron and steel industry
    • Compression molding
    • Marine hydraulics
    • Hydraulic presses
    • Scrap metal shearing

    Multi-part seal set for sealing piston rods, it consists of one pressure ring, at least three sealing rings and one support ring. This seal set is for robust operational areas, mainly for provision of replacement part to old plant.

    • Proven under extreme conditions
    • Long service life
    • Can be optimally adjusted for respective application
    • Functions over a certain time period even with poorer surfaces
    • Use and design are conditional, and have to be taken into account where there are fluctuations of leakage and friction behavior
  • 0049 MERKEL 1170 V-Packing Set (1 + 1 + 1)

    This Merkel PISTON V-packing set is composed of 2 rubber-fabric rings, 1 plastic (POM) male adapter, and one female adapter ring. All Merkel V-packings are spirally wound by hand, rather than cut from sheets. This eliminates fabric endweave and delamination.

    Technical Data

    Pressure Speed
    40 MPa / 5800 PSI 0.5 m/s / 8 ft/s BI-NBR B246/ BI-NBR B 210/ 85 NBR B247

    Applications

    • Heavy duty applications
    • Injection molding machines
    • Civil engineering
    • Forging
    • Iron and steel industry
    • Compression molding
    • Marine hydraulics
    • Hydraulic presses
    • Scrap metal shearing

    Multi-part seal set for sealing piston rods, it consists of one pressure ring, at least three sealing rings and one support ring. This seal set is for robust operational areas, mainly for provision of replacement part to old plant.

    • Proven under extreme conditions
    • Long service life
    • Can be optimally adjusted for respective application
    • Functions over a certain time period even with poorer surfaces
    • Use and design are conditional, and have to be taken into account where there are fluctuations of leakage and friction behavior
  • 0106 MERKEL 1000 Heavy Duty V-Packing Set (1 + 3 + 1)

    MERKEL 1000 Heavy Duty V-Packing is primarily used in large diameter presses. It has a robust design that provides excellent wear and extrusion resistance. Each ring is spirally rolled by hand to ensure the highest level of quality possible. The 0106 series is composed of 3 intermediate rings and a top and bottom adaptor.

    Technical Data

    Pressure Linear Velocity Medium/Temperature
    9000 PSI / 630 bar 1.5 ft/s / 0.5 m/s Hydraulic oils, Water and Emulsions (HFA) +120C/250F

    Applications

    • Hydraulic Presses/Rams
    • Pull-Back Cylinders

    Style 1000 AUTOMATIC V-packings are designed for sealing piston rods and rams. By virtue of their robust design, these packings are suitable for heavy duty applications, such as horizontal presses or where side loads are involved. The packing is made from tough, wear resistant fabric. The special shape of this packing enables it to be keyed together under axial compression. These packings can successfully be used where the piston rod or ram is in poor condition and where guide bushings are worn.

    • Bridges large gaps even with high pressures
    • Works well is scored/damaged rams
    • Pressure spiking applications
    • Highly wear-resistant
    • Some materials can work with water based fluids
  • 0107 MERKEL 1000 Heavy Duty V-Packing Set (1 + 4 + 1)

    MERKEL 1000 Heavy Duty V-Packing is primarily used in large diameter presses. It has a robust design that provides excellent wear and extrusion resistance. Each ring is spirally rolled by hand to ensure the highest level of quality possible. The 0107 series is composed of 4 intermediate rings and a top and bottom adaptor.

    Technical Data

    Pressure Linear Velocity Medium/Temperature
    9000 PSI / 630 bar 1.5 ft/s / 0.5 m/s Hydraulic oils, Water and Emulsions (HFA) +120C/250F

    Applications

    • Hydraulic Presses/Rams
    • Pull-Back Cylinders

    Style 1000 AUTOMATIC V-packings are designed for sealing piston rods and rams. By virtue of their robust design, these packings are suitable for heavy duty applications, such as horizontal presses or where side loads are involved. The packing is made from tough, wear resistant fabric. The special shape of this packing enables it to be keyed together under axial compression. These packings can successfully be used where the piston rod or ram is in poor condition and where guide bushings are worn.

    • Bridges large gaps even with high pressures
    • Works well is scored/damaged rams
    • Pressure spiking applications
    • Highly wear-resistant
    • Some materials can work with water based fluids
  • 0158 MERKEL 1000 Heavy Duty V-Packing Set (1 + 2 + 1)

    MERKEL 1000 Heavy Duty V-Packing is primarily used in large diameter presses. It has a robust design that provides excellent wear and extrusion resistance. Each ring is spirally rolled by hand to ensure the highest level of quality possible. The 0158 series is composed of 2 intermediate rings and a top and bottom adaptor.

    Technical Data

    Pressure Linear Velocity Medium/Temperature
    9000 PSI / 630 bar 1.5 ft/s / 0.5 m/s Hydraulic oils, Water and Emulsions (HFA) +120C/250F

    Applications

    • Hydraulic Presses/Rams
    • Pull-Back Cylinders

    Style 1000 AUTOMATIC V-packings are designed for sealing piston rods and rams. By virtue of their robust design, these packings are suitable for heavy duty applications, such as horizontal presses or where side loads are involved. The packing is made from tough, wear resistant fabric. The special shape of this packing enables it to be keyed together under axial compression. These packings can successfully be used where the piston rod or ram is in poor condition and where guide bushings are worn.

    • Bridges large gaps even with high pressures
    • Works well is scored/damaged rams
    • Pressure spiking applications
    • Highly wear-resistant
    • Some materials can work with water based fluids
  • 0171 MERKEL 1170 V-Packing Set (1 + 1 + 1) ES

    This Merkel PISTON V-packing set is composed of 1 rubber-fabric ring and male and female (top and bottom) adaptor ring. The male adaptor ring is specially fabricated with rubber pegs to keep the set energized properly; this allows the set to work well in some non-adjustable housings. All Merkel v-packings are spirally wound by hand, rather than cut from sheets. This eliminates fabric endweave and delamination.

    Technical Data

    Pressure Speed
    40 MPa/ 5800 PSI 0.5 m/s / 8 ft/s BI-NBR B246/ BI-NBR B 210/ 85 NBR B247

    Applications

    • Heavy duty applications
    • Injection molding machines
    • Civil engineering
    • Forging
    • Iron and steel industry
    • Compression molding
    • Marine hydraulics
    • Hydraulic presses
    • Scrap metal shearing

    Multi-part seal set for sealing piston rods, it consists of one pressure ring, at least three sealing rings and one support ring. This seal set is for robust operational areas, mainly for provision of replacement part to old plant.

    • Proven under extreme conditions
    • Long service life
    • Can be optimally adjusted for respective application
    • Functions over a certain time period even with poorer surfaces
    • Use and design are conditional, and have to be taken into account where there are fluctuations of leakage and friction behavior
  • 0172 MERKEL 1170 V-Packing Set (1 + 2 + 1) ES

    This Merkel PISTON V-packing set is composed of 2 rubber-fabric rings and male and female (top and bottom) adaptor ring. The male adaptor ring is specially fabricated with rubber pegs to keep the set energized properly; this allows the set to work well in some non-adjustable housings. All Merkel v-packings are spirally wound by hand, rather than cut from sheets. This eliminates fabric endweave and delamination.

    Technical Data

    Pressure Speed
    40 MPa/ 5800 PSI 0.5 m/s / 8 ft/s BI-NBR B246/ BI-NBR B 210/ 85 NBR B247

    Applications

    • Heavy duty applications
    • Injection molding machines
    • Civil engineering
    • Forging
    • Iron and steel industry
    • Compression molding
    • Marine hydraulics
    • Hydraulic presses
    • Scrap metal shearing

    Multi-part seal set for sealing piston rods, it consists of one pressure ring, at least three sealing rings and one support ring. This seal set is for robust operational areas, mainly for provision of replacement part to old plant.

    • Proven under extreme conditions
    • Long service life
    • Can be optimally adjusted for respective application
    • Functions over a certain time period even with poorer surfaces
    • Use and design are conditional, and have to be taken into account where there are fluctuations of leakage and friction behavior
  • 0173 MERKEL 1170 V-Packing Set (1 + 3 + 1) ES

    This Merkel Rod V-packing set is composed of 3 rubber-fabric rings and male and female (top and bottom) adaptor ring. The male adaptor ring is specially fabricated with rubber pegs to keep the set energized properly; this allows the set to work well in some non-adjustable housings. All Merkel v-packings are spirally wound by hand, rather than cut from sheets. This eliminates fabric endweave and delamination.

    Technical Data

    Pressure Speed
    40 MPa/ 5800 PSI 0.5 m/s / 8 ft/s BI-NBR B246/ BI-NBR B 210/ 85 NBR B247

    Applications

    • Heavy duty applications
    • Injection molding machines
    • Civil engineering
    • Forging
    • Iron and steel industry
    • Compression molding
    • Marine hydraulics
    • Hydraulic presses
    • Scrap metal shearing

    Multi-part seal set for sealing piston rods, it consists of one pressure ring, at least three sealing rings and one support ring. This seal set is for robust operational areas, mainly for provision of replacement part to old plant.

    • Proven under extreme conditions
    • Long service life
    • Can be optimally adjusted for respective application
    • Functions over a certain time period even with poorer surfaces
    • Use and design are conditional, and have to be taken into account where there are fluctuations of leakage and friction behavior
  • 0174 MERKEL 1170 V-Packing Set (1 + 4 + 1) ES

    This Merkel Rod V-packing set is composed of 4 rubber-fabric rings and male and female (top and bottom) adaptor ring. The male adaptor ring is specially fabricated with rubber pegs to keep the set energized properly; this allows the set to work well in some non-adjustable housings. All Merkel v-packings are spirally wound by hand, rather than cut from sheets. This eliminates fabric endweave and delamination.

    Technical Data

    Pressure Speed
    40 MPa/ 5800 PSI 0.5 m/s / 8 ft/s BI-NBR B246/ BI-NBR B 210/ 85 NBR B247

    Applications

    • Heavy duty applications
    • Injection molding machines
    • Civil engineering
    • Forging
    • Iron and steel industry
    • Compression molding
    • Marine hydraulics
    • Hydraulic presses
    • Scrap metal shearing

    Multi-part seal set for sealing piston rods, it consists of one pressure ring, at least three sealing rings and one support ring. This seal set is for robust operational areas, mainly for provision of replacement part to old plant.

    • Proven under extreme conditions
    • Long service life
    • Can be optimally adjusted for respective application
    • Functions over a certain time period even with poorer surfaces
    • Use and design are conditional, and have to be taken into account where there are fluctuations of leakage and friction behavior
  • 0175 MERKEL 1170 V-Packing Set (1 + 5 + 1) ES

    This Merkel Rod V-packing set is composed of 5 rubber-fabric rings and male and female (top and bottom) adaptor ring. All Merkel V-packings are spirally wound by hand, rather than cut from sheets. This eliminates fabric endweave and delamination.

    Technical Data

    Pressure Speed
    40 MPa/ 5800 PSI 0.5 m/s / 8 ft/s BI-NBR B246/ BI-NBR B 210/ 85 NBR B247

    Applications

    • Heavy duty applications
    • Injection molding machines
    • Civil engineering
    • Forging
    • Iron and steel industry
    • Compression molding
    • Marine hydraulics
    • Hydraulic presses
    • Scrap metal shearing

    Multi-part seal set for sealing piston rods, it consists of one pressure ring, at least three sealing rings and one support ring. This seal set is for robust operational areas, mainly for provision of replacement part to old plant.

    • Proven under extreme conditions
    • Long service life
    • Can be optimally adjusted for respective application
    • Functions over a certain time period even with poorer surfaces
    • Use and design are conditional, and have to be taken into account where there are fluctuations of leakage and friction behavior
  • 0176 MERKEL 1170 V-Packing Set (1 + 6 + 1) ES

    This Merkel Rod V-packing set is composed of 6 rubber-fabric rings and male and female (top and bottom) adaptor ring. The male adaptor ring is specially fabricated with rubber pegs to keep the set energized properly; this allows the set to work well in some non-adjustable housings. All Merkel v-packings are spirally wound by hand, rather than cut from sheets. This eliminates fabric endweave and delamination.

    Technical Data

    Pressure Speed
    40 MPa/ 5800 PSI 0.5 m/s / 8 ft/s BI-NBR B246/ BI-NBR B 210/ 85 NBR B247

    Applications

    • Heavy duty applications
    • Injection molding machines
    • Civil engineering
    • Forging
    • Iron and steel industry
    • Compression molding
    • Marine hydraulics
    • Hydraulic presses
    • Scrap metal shearing

    Multi-part seal set for sealing piston rods, it consists of one pressure ring, at least three sealing rings and one support ring. This seal set is for robust operational areas, mainly for provision of replacement part to old plant.

    • Proven under extreme conditions
    • Long service life
    • Can be optimally adjusted for respective application
    • Functions over a certain time period even with poorer surfaces
    • Use and design are conditional, and have to be taken into account where there are fluctuations of leakage and friction behavior
    2017 All Rights Reserved.  Industrial Seal, Inc. 10460 Markison Road Dallas, Texas 75238 Tel: 866.907.3129 Fax: 214.736.1243 | Parker | Simrit | Disogrin | NOK | Merkel  |  Sitemap